- This topic has 6 replies, 6 voices, and was last updated December 11, 2017 by
Ryan S.
VRA install does not see DVSwitch networks
-
I’ve just been handed an issue where, upon installing a VRA onto a group of ESX hosts (v5.5.u2) the VRA install wizard is unable to see the DVSwitch networks, only the standard switch networks. Networking on this host works as expected, otherwise.
Has anyone encountered this and if so, what was your solution?
Regards,
~Pete
Tagged: VRA ESX5.5 networkHarry SNovember 16, 2016 07:15:01 PMHi Pete,
Can you confirm for me if you have added all hosts in the cluster to the Distributed vSwitch, please? If they haven’t been added, please add them and try again in order for ZVR to be able to take advantage of these portgroups.
Thanks!
Harry
Follow me: www.twitter.com/HarrySiiiTagged: VRA ESX5.5 networkWas there a resolution to this? I am having the same issue and have confirmed that all hosts in the cluster are in the dvSwitch. VMs network OK on those port groups but when I try to install VRA, the network drop-down is empty
Tagged: VRA ESX5.5 networkPete BMarch 16, 2017 03:49:09 PMI do apologize, this was some months ago and I should’ve followed up with my findings.
While I wasn’t able to resolve the network configuration matter during the VRA deployment I was able to change the network adapter assignment post-deploymentby editing the virtual machine and selecting the DVSwitch network from the drop-down option on the adapter.
While it doesn’t address the original issue it was a useful workaround that got me past the issue.
~Pete
Tagged: VRA ESX5.5 networkChris CJuly 10, 2017 01:17:37 PMI have been able to reproduce and fix this error twice now. One way to create the issue is to remove a host from vcenter without first removing it from the DVSitches. When you add the host back and tell the switches to fix themselves, the networks will not list in Zerto.
To Fix the issue, I removed the host from all DVSwitches, refreshed Zerto Services, Add the Host back to DVSwitches, refreshed Zerto Services. Once completed, I was able to see all of the networks.
(note) I was able to fix it a third time, just by refreshing the Zerto web interface instead of the services.
Tagged: VRA ESX5.5 networkRalph HDecember 1, 2017 07:44:02 PMHi, we had the same issue and I didn’t receive a work around from support after opening a ticket but we (on a Cisco UCS B200 blade Svr) ended up re adding a local vSwitch (vpshere and esxi 6.5) with no adapters, to the VM ESXi host after we failed to install the VRA from the Zerto GUI, then after the VRA (new or in our case, a rebuild of the cisco blade svr with the VMware esxi OS) was built/installed, we switched the VRA VM vmxnet3 Nic over to the distributed level switch. its been running (connected) for couple of days now with no alarms.
Thank you for this information, Ralph!
Tagged: VRA ESX5.5 network
