• This forum has 29 topics, 74 replies, and was last updated June 29, 2020 by Yossi A.
    • Hyper-V
    • VRA Hyper-V Failed at 70%

      Hi Guys I get this message when I try to insall a vra on hyper v failed to install vra driver on host [Host b423368f-35db-45bc-8a39-d7b3670a8bfa, server d2977182-1ea5-aec5-9ef1-c0b8579802df]: There are 2 zlogic and 2 zintercept drivers in the registry.

    • People: 5
      Replies: 6
    • December 3, 2020
    • Microsoft VMM 2019 Support

      Anyone integrate with VMM 2019 yet?  I can’t see it on the support matrix and we had rolled it out right before we bought Zerto.  Did 7.5 add support?  I was told that the SLA states 90 days until supported and VMM 2019 has been out for nearly six months.

    • People: 6
      Replies: 10
    • August 17, 2020
    • Post Installation Issue

      I saw a thread from last year regarding a similar issue, but there was never a response to the original poster. I just installed the latest version 8 onto a Server 2019 VM that is connected to SCVMM 2019 that uses all server 2019 hosts.  When I log in to ZVM everything is just spinning. […]

    • People: 1
      Replies: 0
    • June 29, 2020
    • Isolating Replication Traffic

      Hello All, just finished deploying Zerto in our Hyper-V environment. We currently have all components communicating on our management network and would like to isolate the replication traffic to a dedicated network. In our VMware environment we have the VRAs on a replication network and the ZVM dual homed. It is my understanding that the […]

    • People: 1
      Replies: 0
    • June 29, 2020
    • Hyper-V maintenance – Best practice?

      Hi, What’s the best practice for putting Hyper-V hosts in maintenance using the drain function? I’ve got a Hyper-V Zerto client who’s looking to automate maintenance on his failover cluster, but during the drain process, the process is failing because the owner for the VRA is that host only, and therefore the VRA VM can’t […]

    • People: 2
      Replies: 1
    • April 23, 2020
    • SCVMM Install

      Just started our Zerto implementation on Hyper-V; for the SCVMM install, should this be a VM itself running on one of the Hyper-V hosts or is it a better practice to install on a standalone physical server.? The only reason I ask is due to the SQL server requirements for SCVMM.  Thanks!

    • People: 3
      Replies: 6
    • March 23, 2020
    • Server 2019 Host

      We have a cluster running 2012R2 on two hosts and want to upgrade to Server 2019, anyone heard if this will be supported soon?

    • People: 3
      Replies: 4
    • March 23, 2020
    • Initial Sync with the Hyper-V

      I have Hyper-V at both source and target location and both locations are connected with the wan link. So I am looking for steps to use the seeding option for initial sync. Can anyone please provide reference link which has clear instructions to achieve the same?

    • People: 1
      Replies: 0
    • November 5, 2019
    • Hyper-V test nic not available

      I am replicating using Zerto and am unable to assign a test NIC for my failover testing. I have logical names assigned in SCVMM, they are not available in Zerto. I 1)edit the VPG, 2)go to edit default recovery settings, 3)go to the pull down for failover test network and only have one choice available. […]

    • People: 2
      Replies: 2
    • October 31, 2019
    • VRA Hyper-V failed at 5%

      hello, i have a ZVM installed on a Hyper-V 2016 VM and trying to install the VRA at the host which is also Win2016 but it fails at 5% with the error message:   “failed – errors : Error Code : InvalidRemotingParameter ; Message : VMM is unable to process one or more of the […]

    • People: 1
      Replies: 0
    • October 15, 2019
    • ZVM isn't showing the web interface elements

      Hi After installing the Zerto on the dedicated server with operating system Windows Server 2016 Datacenter I can’t manage my Zerto enviroment. After logging in ZVM web interface, the ZVM isn’t showing elements on main page. I see the circle progress bar on the ZVM main page (in various parts of the interface like throughtput, […]

    • People: 1
      Replies: 0
    • September 1, 2019
    • VM not showing to replicate

      I have an existing VPG from a cluster node. There is another VM on the same node from which I would like to replicate and is not showing up when I edit the VPG. Not sure why. Any help? running Zerto version 7 update 2 cluster on Hyper-V 2012 R2 OS replicating to a Hyper-V […]

    • People: 1
      Replies: 1
    • August 29, 2019
    • In Unprotected VM not appear when creating the VPG

      When creating new VPGs to add the machines in the option (Unprotected VMs) is not showing many of the vms that we have in the environment. Sometimes when you close and open the VPGs creation screen, some VMs appear in the option (Unprotected VMs), but others still do not appear. The environment is composed of […]

    • People: 2
      Replies: 4
    • May 31, 2019
1 2

You must be logged in to create new topics. Click here to login